Pausing, storing and restarting your Gardyn
You can pause a Gardyn for a long weekend or a whole season. For breaks up to 2 weeks, keep it running and use Vacation Mode; for a summer, a move or longer, harvest everything, run a full cleanse, put it away clean, and start fresh with new yCubes when you are ready. A restart is quick: plain tap water, a reset Start of Watering date, and sprouts can appear in as few as 4 days.
Key takeaways
- Under 5 days, top off the tank. For 5 to 14 days, members can turn on Vacation Mode for plants at least 30 days old.
- For longer breaks with no one to top off the tank, harvest, clean and store the Gardyn dry.
- Monthly memberships can be paused for 1 to 3 months. 1-year and 2-year plans can’t be paused, but you can turn off auto-renewal.
- Banked credits are preserved for 90 days after a membership stops, and the cap (30 for Gardyn Home, 16 for Gardyn Studio) equals a full replant of 1-credit yCubes.
- After pests, starting fresh takes about 1.5 hours of active time and removes what pests feed on.
Should you pause your Gardyn, store it or keep it running?
Match the plan to the length of your break. The table below shows the simplest option for each situation.
| How long you are away | Best option | What to do before you go |
|---|---|---|
| Under 5 days | Keep running | Top off the tank and let normal watering run |
| 5 to 14 days | Vacation Mode (members) | Harvest what is ready, trim roots, top off with fresh water and plant food |
| Over 2 weeks, someone can visit | Keep running | Ask someone to top off the tank once |
| A summer, a move or longer | Clean, store, start fresh | Harvest, full cleanse, dry the parts, pause or adjust the membership |
Can you use Vacation Mode for long trips?
Vacation Mode is built for 5 to 14 days; running it longer than 2 weeks can harm long-term plant health. For a longer trip, ask someone to top off the tank once, or plan a clean shutdown. Here is how to keep an indoor garden alive while you’re on vacation.
Gardening outside this spring: should you keep the Gardyn running?
Many outdoor gardeners keep it running to start seedlings. Plants started on a Gardyn can move outdoors once soil stays above 50 to 60°F with no further frost risk; see transplanting yCubes outdoors. Or shut it down for summer and restart in the fall.

How do you shut down and store your Gardyn for a few months?
Harvest everything and run a full cleanse before you put the unit away; Gardyn recommends a whole-Gardyn cleanse when you plan to take a break from growing. The order looks like this:
- Harvest what you can and retire the remaining plants.
- Do a full cleanse. The help center’s How to Clean Your Gardyn has the steps and citric acid amounts.
- If you need to take the Gardyn apart, follow How Do I Pack and Move My Gardyn? to disassemble and dry it.
Can you store your Gardyn in a closet for a summer or longer?
Gardyn’s help center covers cleaning, packing and starting fresh rather than long-term storage. Start with a full cleanse, use the pack and move article above if the unit needs to come apart to fit the space, and ask Gardyn Customer Success at support@mygardyn.com about where and how to store it.
What happens to your membership, credits and Kelby during a pause?
A monthly membership can be paused for 1 to 3 months, while 1-year and 2-year plans can’t be paused; turning off auto-renewal keeps benefits until the plan ends. Current plans are on the Gardyn membership page, and the help center explains how to pause a monthly membership or cancel auto-renewal in the app.
What happens to banked credits when you pause or cancel?
Unused credits roll over while the membership is active. If it stops, Gardyn preserves your credits for 90 days, and they expire after more than 90 days of inactivity. Planning a fall return after a long summer? Count the days, or spend the credits you want first.
Will banked credits cover a full replant?
A full bank covers a full tower of 1-credit plants, because the cap matches the slot count: 30 on Gardyn Home and 16 on Gardyn Studio. Lettuces such as Butterhead cost 1 credit, while fruiting crops such as Cherry Tomatoes cost 2, so a mixed replant may need a few more.
Which tasks still work without Kelby?
Without a membership, the app still edits light and water schedules, shows the tank level, sends tank refresh reminders and opens the Plant Book. Kelby’s tasks, reminders and guidance are free for 30 days after you first pair a Gardyn, then require a membership, as do Kelby’s watering optimization, Vacation Mode, Ask Kelby and unlimited time-lapse videos. Every owner can get replacements for yCubes that don’t sprout.
Do you keep Kelby history and time-lapses if you rejoin?
Stopping a membership and deleting your account are separate steps; deleting an account permanently removes its data and cannot be undone, so keep the account. Time-lapses in the Journal can be shared by text, email or social media, so save favorites before a long break. Gardyn Customer Success at support@mygardyn.com can confirm what your account shows after rejoining.
How do you time a restart around a move?
Clean the Gardyn before you pack, then restart after you are settled and on Wi-Fi at the new place. To bring plants by car or truck instead, they can stay in the columns with the tank emptied and locked to the lid; add fresh water and plant food soon after you arrive.
At the new place, the Gardyn needs a 2.4 GHz Wi-Fi network; if your credentials changed, tap Reconnect in the app to pair again. This table shows how fast a restart pays off:
| Crop type | Typical time to first harvest after a restart |
|---|---|
| Sprouts appear | As few as 4 days, depending on variety |
| Lettuces | About 3 to 4 weeks to full size |
| Most leafy greens | 3 to 5 weeks |
| Herbs | 4 to 6 weeks |
| Cherry Tomatoes | About 60 days to flower and begin fruiting |

How do you deep clean and restart after a long break?
Starting fresh means germinating an entirely new generation of yCubes on a clean Gardyn and resetting the Start of Watering (SOW) date, the first day the yCubes are watered. Resetting it turns on Germination Mode, an early-life watering schedule that improves sprouting. The help center article Starting Fresh: How to Grow a New Generation of yCubes walks through it; skipping the cleaning can bring back old problems.
Does the tank need water before the yCubes go in?
Yes. Fill the tank with tap water only, 3 gallons for Gardyn Home or 2 gallons for Gardyn Studio, then place the yCubes. Do not add plant food yet, because plant food inhibits germination; Kelby sends a task for the first sprout dose. Remove each yCube’s cardboard cover, and aim for about 70°F and 65 to 75% humidity.
How do you clean a stained tank after months away?
A full cleanse with citric acid and a bottle brush lifts most algae and biofilm. Some stains may remain on yCube holders afterward, and those pieces are still clean. Once plant food is back in the tank, weekly HydroBoost helps prevent algae, biofilm and salt deposits, and it works best in a clean Gardyn.
How do you restart after algae and mineral buildup?
Clean first, then block light. Cover any slot you are not using with Gardyn Caps, add yCovers once sprouts are thinned, and wipe the columns now and then to keep mineral crust at bay.
How do you restart after spider mites or aphids?
Remove every plant, clean the whole Gardyn, check nearby houseplants, then start fresh. Pests feed on living plants, so a clean, empty tower gives them nothing to return to. Indoors they usually arrive on houseplants, pets or through windows; yCubes contain no soil and do not bring pests.
Speed is why partial cleanups fail. Under favorable conditions, a spider mite generation can be completed in less than a week, and in warm weather many aphids develop from newborn to reproducing adult in seven to eight days, with each adult producing up to 80 offspring in a week.
Spider mites spreading: do you have to toss everything?
No. You can treat and keep your plants or start fresh, and switch to starting fresh at any point. Treating means rinsing and Castile soap dunks every few days, about 3 hours of active time over 16 days; starting fresh takes about 1.5 hours. Gardyn’s spider mite and aphid treatment guides have the full routines.
How long until spider mites and fungus die off?
After pests, Gardyn’s Starting Fresh guide offers an optional dormant phase: leave the cleaned Gardyn powered off and empty for up to 2 to 3 weeks to remove the environment pests are attracted to. White fuzz on rockwool is a mold whose spores are in every home, so prevent it with a small fan on low and yCovers after thinning. Identify tiny black bugs first with the Pest ID Quiz in the app.
What should you grow when you restart after pests?
Start with Beginner-rated plants that sprout fast and regrow quickly, such as Romaine, Kale and Basil. Leave space for airflow, and scout under leaves and on new growth every 3 to 4 days for the first few weeks.
How do you protect plants during a multi-day power outage?
Plants are fine without lights for a few days and bounce back when power returns. If the outage will last more than a day or two, water them by hand with clean water. The Gardyn reconnects to its last Wi-Fi network on its own; if it hasn’t within an hour, turn it off for 5 minutes, back on for 5, then check the app.

What should a teacher do with a classroom Gardyn over summer?
Vacation Mode covers school breaks up to 2 weeks, so for a full summer, either take the Gardyn home with its plants or harvest, clean and store it, then start fresh in the fall. Lettuces from a fall restart are ready in about 3 to 4 weeks.
Ready to grow again?
Order new yCubes from the Gardyn plant catalog, and use the Gardyn Sprout Nursery for later plantings once the tower is growing again. If your restart is also an upgrade, Gardyn Home 4 has column seals that prevent nearly all internal growth, and Gardyn Studio 2 adds easy-clean columns with airtight seals. Unsure which fits? Take the Gardyn comparison quiz.
Frequently asked questions
Can you pause a Gardyn membership over the summer?
Monthly memberships can be paused for 1 to 3 months in the Gardyn app, which covers most summers. Yearly and two-year plans can’t be paused, though you can turn off auto-renewal and keep your benefits until the plan ends. If you pause, harvest and clean the Gardyn first so it is ready to restart, and plan your fall yCube order before the pause ends.
Can you pause a yearly membership while you garden outside?
Today, 1-year and 2-year plans can’t be paused. Your membership keeps running, so many owners use the season to start seedlings on the Gardyn for the outdoor garden, keep a few herbs going, or bank credits toward a full replant in the fall. Credits roll over up to 30 on Gardyn Home and 16 on Gardyn Studio while the membership is active.
Do banked credits come back if you rejoin in the fall?
Gardyn preserves credits for 90 days after a membership stops, so rejoining within that window lets you use them. After more than 90 days of inactivity, the credits expire. A June to September break can run close to that limit, so check your dates, or spend the credits you want on yCubes or plant food before you stop.
Can you rejoin for a month or two to restart?
Current membership options are on the Gardyn membership page, and the app shows the plans available for your device. An active membership adds Kelby’s tasks and Smart Watering during the sensitive germination weeks, and members receive yCube credits every month. Gardyn Customer Success can answer plan questions at support@mygardyn.com or by chat in the app.
How long can a Gardyn sit unused?
Gardyn’s guidance covers cleaning and starting fresh rather than a storage time limit, and Gardyn Customer Success can answer storage questions. Gardyn recommends a full cleanse before a break from growing, so you aren’t facing old algae, biofilm or mineral crust on restart day. When you are ready, fill it with tap water, reset the Start of Watering date and add fresh yCubes.
Can you grow spare yCubes in water outside the Gardyn?
Yes, for germination. The Sprout Nursery holds up to 10 yCubes in plain water and sits on the Gardyn’s lid, where the lights add warmth. Move yCubes to the tower once they show true leaves, roots about 0.5 inches long or yellowing cotyledons. The Nursery is a starting space, so the plants need the Gardyn for long-term growth.
What is the fastest way to restart a neglected Gardyn?
Start fresh. Remove every plant, give the unit a full cleanse, fill the tank with tap water only and reset the Start of Watering date to turn on Germination Mode. Sprouts can appear in as few as 4 days, with lettuces ready in about 3 to 4 weeks.