Two Gardyn HydroBoost water treatment bottles with dark green labels on a light beige background

HydroBoost and pH in your Gardyn, explained simply

HydroBoost is Gardyn’s plant-based water treatment: it lowers pH, balances plant nutrients and keeps the tank and columns clean. Measure Gardyn Plant Food correctly, add HydroBoost with your weekly top-off and refresh the tank when Kelby asks, and Gardyn recommends no pH testing at all.

Key takeaways

  • Add HydroBoost once a week, ideally with your weekly top-off or tank refresh: 2 teaspoons (10 mL) per full Gardyn Home tank or 1.5 teaspoons (8 mL) for Gardyn Studio with standard tap water.
  • Your water type sets the dose. Hard water takes more; filtered, reverse osmosis, distilled or naturally soft water takes less, and Gardyn recommends a Cal-Mag supplement with those waters.
  • HydroBoost is not plant food and cannot replace it. Gardyn Plant Food and HydroBoost are formulated to work together.
  • Avoid water from a water softener. Naturally soft water is fine.
  • If plants struggle, start with a tank refresh, then check the rest of the routine or Ask Kelby in the app.

What is HydroBoost, and what does it do?

HydroBoost is a plant-based water treatment that lowers pH, balances plant nutrients and keeps the inside of your Gardyn clean. Gardyn’s guidance is that adding it regularly helps prevent and reduce algae, biofilm, and nutrient and salt deposits, so you need fewer whole-device cleanings.

In your Gardyn, a pump sends water and plant food from the tank up each column, and the water drains back to be reused, so HydroBoost added to the tank travels the whole Hybriponic™ loop. Combined with regular tank refreshes and root maintenance, Gardyn says it can replace weekly hydrogen peroxide and the total-Gardyn cleanse.

Find HydroBoost in the Gardyn shop, or a HydroBoost 2-pack to keep a spare on hand.

Do you need to test pH in a Gardyn?

No. Gardyn Plant Food and HydroBoost are formulated to create a well-balanced pH and EC across a range of tap waters and plant varieties, as long as you follow the plant food guidelines, add HydroBoost with weekly top-offs and refresh the tank when Kelby prompts.

In practice, that means three habits replace a meter:

  1. Measure and dissolve plant food for every top-off.
  2. Add HydroBoost at the dose for your water type each week.
  3. Refresh the tank when the Kelby task arrives.

If you are curious what pH and EC readings mean, the help center covers it in water quality: pH and EC and do I need to measure my water’s pH. For more background, see pH and EC in hydroponics.

Gardyn Home full of leafy greens in a bright open plan office with desks and chairs

When should you add HydroBoost, and how much?

Add HydroBoost straight to the tank once a week, ideally with your weekly top-off or a tank refresh. Gardyn notes it works best when you start with a clean Gardyn.

The table below shows Gardyn’s recommended dose per full tank for each water type.

Water type Gardyn Home Gardyn Studio
Standard tap water 2 teaspoons (10 mL) 1.5 teaspoons (8 mL)
Hard water 4 teaspoons (20 mL) 3 teaspoons (16 mL)
Filtered, reverse osmosis, distilled or naturally soft water 1 teaspoon (5 mL) 0.5 teaspoon (3 mL)

Three dosing details from Gardyn:

  1. Not sure your water is hard? Use the standard dose for at least a month, then increase 1 teaspoon at a time, up to the hard water dose, if needed.
  2. Growing four or more fruiting plants? With crops like Cherry Tomatoes, Sweet Peppers or Cucumbers, add HydroBoost up to every 3 days.
  3. Running more than one model? A Gardyn Home dose will not hurt a Gardyn Studio.

The Adjustable Spoon in the Gardyn Harvest Kit measures HydroBoost as well as plant food. The full routine, including timing for a brand-new Gardyn, is in the help center article How, Why, and When to Add HydroBoost.

Is HydroBoost plant food?

No. HydroBoost is not plant food and cannot replace it. Your plants are fed by Gardyn Plant Food, a mineral-based formula with an NPK (nitrogen, phosphorus, potassium) ratio of 7-3-11, and HydroBoost keeps the water in the tank balanced and clean.

Gardyn’s “no pH testing needed” guidance is built on that pairing. Gardyn does not recommend organic plant food in its devices, because organic formulas carry byproducts that cause build-up and can clog the pump. See mineral or organic plant food and the guide to hydroponic nutrients.

Measure plant food with the spoon that came with your Gardyn or the Adjustable Spoon, which has all three plant food measurements, and dissolve it in water before adding it to the tank. Gardyn’s guidance is that more plant food does not mean bigger plants.

Is HydroBoost worth it?

For most owners, yes: one weekly step lowers pH, helps balance nutrients and reduces the algae, biofilm and mineral build-up that would otherwise call for a full cleanse. How long a bottle lasts depends on your Gardyn model and how often you add it; check the HydroBoost product page for current details.

Gardyn’s care guidance, including Kelby’s tasks and the no-pH-testing approach, is built around Gardyn Plant Food plus HydroBoost. Two habits help each bottle go further: measure the dose for your water type instead of guessing high, and keep algae from starting by covering empty slots with Gardyn Caps and putting yCovers on yCubes (here is how yCovers help). HydroBoost will not remove growth already inside your Gardyn, so start from a clean device.

Gardyn Home with greens, sunflowers and flowers on a solid light green background

Which water should you use: tap, filtered, reverse osmosis or softened?

Gardyn recommends untreated tap water as the best source. Most other sources work with small adjustments, as the table shows.

Water source What Gardyn recommends
Standard municipal tap water Preferred; standard HydroBoost dose
Hard tap or well water Hard water dose; if you are not sure your water is hard, start at the standard dose and increase gradually
Naturally soft water Lower HydroBoost dose; add 1 teaspoon of Cal-Mag per gallon once a week
Filtered, reverse osmosis or distilled water Lower HydroBoost dose; add 1 teaspoon of Cal-Mag per gallon once a week
Water from a water softener Not recommended; use untreated municipal water

Add Cal-Mag, a calcium and magnesium supplement, at the weekly top-off or refresh. If your home has a water softener, Gardyn recommends filling the tank with untreated municipal water instead. To learn your water’s hardness, ask your water supplier, which often reports it annually, or use a test kit from a home improvement store. More in how water type impacts your Gardyn.

How often should you refresh the tank?

Refresh the tank at least every 4 weeks, or when Kelby sends the task. With four or more fruiting plants, such as Tomatoes, Peppers or Cucumbers, Gardyn recommends refreshing more often, up to every 14 days.

A tank refresh means fully draining the tank, cleaning it and refilling it with fresh water mixed with the correct plant food dose, then adding HydroBoost. It resets the nutrient baseline. Between refreshes, weekly top-offs with plant food and HydroBoost keep the water to plant food ratio steady. In the app, the water tile shows the current tank level and refresh reminders, and the Tank Care section (tap Help, then Tank Care) has guides. The tank refresh guide covers the steps.

What if you test and pH looks off?

Gardyn’s routine does not call for measuring pH, so check the routine itself first. Confirm that the HydroBoost dose matches your water type, that plant food is measured and dissolved for every top-off, and that the tank has not gone past its refresh.

If anything has slipped, a tank refresh is the simplest reset, and the weekly routine keeps things on track from there. If you are still unsure, Ask Kelby in the app or contact Gardyn support.

Woman chopping vegetables and herbs at a kitchen counter, another person in the foreground

pH looks normal but plants struggle: what should you check?

Work through Gardyn’s care checklist, in this order:

  1. Plant food. Was every dose measured, dissolved and added on time? Gardyn lists late top-offs and incorrectly measured plant food as common reasons for dry or brown leaf tips.
  2. Tank level. Keep the tank at least half full at all times and top off weekly, or as soon as Kelby sends a low water alert.
  3. Light. Kelby recommends 14 to 16 Boost hours a day. Check the light tile in the app to see how your schedule rates.
  4. Humidity. Gardyn recommends 50 to 70% humidity in the room; a small humidifier helps if it stays low.
  5. Harvesting. Gardyn notes that yellowing on only the outermost or lowest leaves usually means the plant could be harvested sooner.
  6. Roots and columns. Check roots on the schedule in the help center, and wipe the columns with a soft cloth periodically to keep mineral crust at bay.

For anything that does not match these checks, Ask Kelby in the app or contact Gardyn support rather than guessing. Members also get Kelby, your personal AI gardener, which uses the cameras and sensors to watch your plants and sends alerts for low water and tank refreshes. For ongoing habits, see indoor gardening maintenance and cleaning tips.

What’s the next step?

The simplest routine: plant food when Kelby asks, HydroBoost with each weekly top-off and a refresh on Kelby’s schedule. A Gardyn membership adds Kelby’s monitoring, alerts and guidance. Still choosing a model? Compare the floor-standing Gardyn Home 4, which holds 30 plants in about 2 sq ft, with Gardyn Studio 2, which holds 16 plants in about 1.4 sq ft, or take the Gardyn comparison quiz.

Frequently asked questions

Do you really need HydroBoost?

HydroBoost is part of the routine that lets Gardyn owners skip pH testing. Added weekly, it lowers pH, helps balance nutrients and cuts down on algae, biofilm and salt deposits, so you clean the whole device less often. Gardyn’s care guidance and Kelby’s tasks are built around Gardyn Plant Food and HydroBoost working together.

Can you add HydroBoost before plant food?

Follow the help center article How, Why, and When to Add HydroBoost and your Kelby tasks for when to start on a new Gardyn. The first fill is plain tap water, and Kelby sends a task when it is time for the first plant food. From then on, HydroBoost goes in weekly with the top-off or a tank refresh.

Do top-offs need plant food?

Yes. Add Gardyn Plant Food for each gallon of water you top off, at the dose for your plants’ current growth stage: 1/2 teaspoon per gallon for true leaves and early growth, or 1 teaspoon per gallon for blooming and fruiting. This keeps the water to plant food ratio steady. Keep the tank at least half full and top off weekly.

Can you use well water in a Gardyn?

Yes. Gardyn lists standard to hard tap and well water among the water types that work well. Use the hard water dose if your well water is hard. If you are not sure, start with the standard HydroBoost dose for at least a month, then raise it 1 teaspoon at a time up to the hard water dose if needed. Avoid well water that runs through a water softener.

Do you need Cal-Mag with reverse osmosis water?

Yes. Gardyn recommends Cal-Mag with filtered, reverse osmosis, distilled or naturally soft water: 1 teaspoon per gallon, once a week, at the top-off or refresh. Pair it with the lower HydroBoost dose for these waters, which is 1 teaspoon for Gardyn Home or 0.5 teaspoon for Gardyn Studio per full tank.

Is HydroBoost safe?

Use HydroBoost as directed. Gardyn’s handling guidance: keep it out of reach of children, since it is not meant for direct consumption, and do not use it on stainless steel surfaces. If it gets on your skin, flush the area with water. In the tank, follow the dose for your water type and Gardyn model.

Does HydroBoost replace hydrogen peroxide?

Yes. Gardyn’s guidance is that HydroBoost, combined with regular tank refreshes and root maintenance, can replace weekly hydrogen peroxide in the tank and the total-Gardyn cleanse. The help center still lists a separate use for 3% hydrogen peroxide: spraying white fuzz on yCube rockwool. For the tank itself, weekly HydroBoost is the routine Gardyn recommends.

Join us. No green thumb required.