Gardyn Sterilization Guide

1.

Harvest all mature plants that are ready to eat

2.

Dispose of any plants or yCubes that have severe disease or mold infections resistant to treatment

3.

Dispose of any plants or yCubes that have severe disease or mold infections resistant to treatment

4.

Remove all yCube pod holders from Gardyn and clean in the dishwasher. The Gardyn towers should now be empty.

5.

Empty Gardyn Tank and clean thoroughly with dish soap and water, then reattach to Gardyn

6.

Fill Gardyn water to full and add 2 cups (473mL) of 3% Hydrogen Peroxide (available at any CVS)

7.

Turn on the system’s watering feature for 30 minutes to let the water cycle thoroughly and come in contact with all exposed surfaces.

8.

Empty the Gardyn Tank, reattach to Gardyn

9.

Refill Gardyn Tank water level to about half with tap water

10.

Turn on the system’s watering feature for 30 minutes to rinse the System

11.

Empty Gardyn Tank, reattach to Gardyn

12.

Refill to full with tap water, and add the standard 3 tsp of fertilizer

13.

Replace the yCube pods, now clean from the dishwasher

14.

Replace the remaining healthy yCubes into the yCube pods, and cover any open holes with the included covers or new sprouts.

GARDYN
×
Close Panel